2-PC Ball Valve Flanged

Durable 2pc Flanged Ball Valve which Can be Customized From Our Factory in China
1.Introduction of 2pc Flanged Ball Valve

2pc flanged ball valve is full diameter, and the flow hole diameter of the valve is consistent with the inner diameter of the pipeline, so that the pipeline can be cleaned. 2pc flanged ball valve is mainly used to cut off, distribute and change the flow direction of medium in pipeline. 2pc flanged ball valve produced by MST is widely used in water, oil and gas medium, with stable performance and good sealing performance.

2. The Performance Parameters of 2pc Flanged Ball Valve Are As Follows:

1) Working pressure: 1.0mpa-42.0mpa.
2) Working temperature: - 46 + 550 ℃.
3) Driving mode: manual, worm gear, pneumatic, electric, etc.
4) Manufacturing standards: GB, JB, Hg, API, ANSI, BS, JIS, JPI, etc.
5) Valve body material: cast steel, carbon steel, forged steel, A105, F11, F22, stainless steel, 304, 304L, 316, 316L, chromium molybdenum steel, low temperature steel, titanium alloy steel, etc

3.Features of 2pc Flanged Ball Valve Produced by MST:

1) 2pc flattened ball valve automatic pressure relief function: when the medium pressure in the valve cavity is abnormally increased and exceeds the preload of the spring, the valve seat will retreat from the ball to achieve the effect of automatic pressure relief, and the valve seat will automatically reset after pressure relief.
2) 2pc flanged ball valve discharge pipeline: the upper and lower parts of the valve body are equipped with discharge holes to check whether the valve seat leaks. During operation, when the valve is fully open or closed, the pressure in the middle chamber can be removed and the packing can be directly replaced; Can be discharged in the cavity retention, reduce the pollution of the medium to the valve.

3) The valve of 2pc flanged ball valve is designed with auxiliary seat emergency sealing system. Once the seal is damaged or cannot be sealed due to emergency conditions, the sealing surface can be repaired by injecting corresponding sealant into the sealing surface through the auxiliary sealing system to achieve emergency sealing. When the conveying medium is not clean or contains a small amount of particles, in order to protect the sealing surface and ensure reliable sealing, the corresponding cleaning agent or lubricant can be injected into the device to clean the sealing surface.

4.Application of 2pc Flanged Ball Valve

5.About MST

6.FAQ

7.Welcome to Contact Us

Welcome to vist our website about more valve, and please feel free to contact us if you have any questions.
Sale manager: Ranee Liang
Email: ranee@milestonevalve.com